Added base docs

Sergio Oliveira
1 parent 197b2837
Showing 3 changed files with 534 additions and 0 deletions Show diff stats
docs/Makefile
docs/source/conf.py
docs/source/index.rst
@@ -0,0 +1,177 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = build
+
+# User-friendly check for sphinx-build
+ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
+$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
+endif
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
+
+help:
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  xml        to make Docutils-native XML files"
+	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+
+clean:
+	rm -rf $(BUILDDIR)/*
+
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/colab.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/colab.qhc"
+
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/colab"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/colab"
+	@echo "# devhelp"
+
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+latexpdfja:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through platex and dvipdfmx..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."
+
+xml:
+	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+	@echo
+	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+pseudoxml:
+	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+	@echo
+	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
@@ -0,0 +1,335 @@
+# -*- coding: utf-8 -*-
+#
+# colab documentation build configuration file, created by
+# sphinx-quickstart on Thu Jan 22 10:59:39 2015.
+#
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys
+import os
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration ------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.doctest',
+    'sphinx.ext.todo',
+    'sphinx.ext.coverage',
+    'sphinx.ext.pngmath',
+    'sphinx.ext.viewcode',
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The encoding of source files.
+#source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'colab'
+copyright = u'2015, Sergio Oliveira'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = '2.0'
+# The full version, including alpha/beta/rc tags.
+release = '2.0dev'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#today = ''
+# Else, today_fmt is used as the format for a strftime call.
+#today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = []
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+#default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+#show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+#modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+#keep_warnings = False
+
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+html_theme = 'default'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+#html_theme_path = []
+
+# The name for this set of Sphinx documents.  If None, it defaults to
+# "<project> v<release> documentation".
+#html_title = None
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+#html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# Add any extra paths that contain custom files (such as robots.txt or
+# .htaccess) here, relative to this directory. These files are copied
+# directly to the root of the documentation.
+#html_extra_path = []
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+#html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+#html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#html_additional_pages = {}
+
+# If false, no module index is generated.
+#html_domain_indices = True
+
+# If false, no index is generated.
+#html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+#html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+#html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+#html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+#html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+#html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'colabdoc'
+
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+# The paper size ('letterpaper' or 'a4paper').
+#'papersize': 'letterpaper',
+
+# The font size ('10pt', '11pt' or '12pt').
+#'pointsize': '10pt',
+
+# Additional stuff for the LaTeX preamble.
+#'preamble': '',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+  ('index', 'colab.tex', u'colab Documentation',
+   u'Sergio Oliveira', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#latex_use_parts = False
+
+# If true, show page references after internal links.
+#latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+#latex_appendices = []
+
+# If false, no module index is generated.
+#latex_domain_indices = True
+
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    ('index', 'colab', u'colab Documentation',
+     [u'Sergio Oliveira'], 1)
+]
+
+# If true, show URL addresses after external links.
+#man_show_urls = False
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+  ('index', 'colab', u'colab Documentation',
+   u'Sergio Oliveira', 'colab', 'One line description of project.',
+   'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+#texinfo_appendices = []
+
+# If false, no module index is generated.
+#texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#texinfo_show_urls = 'footnote'
+
+# If true, do not generate a @detailmenu in the "Top" node's menu.
+#texinfo_no_detailmenu = False
+
+
+# -- Options for Epub output ----------------------------------------------
+
+# Bibliographic Dublin Core info.
+epub_title = u'colab'
+epub_author = u'Sergio Oliveira'
+epub_publisher = u'Sergio Oliveira'
+epub_copyright = u'2015, Sergio Oliveira'
+
+# The basename for the epub file. It defaults to the project name.
+#epub_basename = u'colab'
+
+# The HTML theme for the epub output. Since the default themes are not optimized
+# for small screen space, using the same theme for HTML and epub output is
+# usually not wise. This defaults to 'epub', a theme designed to save visual
+# space.
+#epub_theme = 'epub'
+
+# The language of the text. It defaults to the language option
+# or en if the language is not set.
+#epub_language = ''
+
+# The scheme of the identifier. Typical schemes are ISBN or URL.
+#epub_scheme = ''
+
+# The unique identifier of the text. This can be a ISBN number
+# or the project homepage.
+#epub_identifier = ''
+
+# A unique identification for the text.
+#epub_uid = ''
+
+# A tuple containing the cover image and cover page html template filenames.
+#epub_cover = ()
+
+# A sequence of (type, uri, title) tuples for the guide element of content.opf.
+#epub_guide = ()
+
+# HTML files that should be inserted before the pages created by sphinx.
+# The format is a list of tuples containing the path and title.
+#epub_pre_files = []
+
+# HTML files shat should be inserted after the pages created by sphinx.
+# The format is a list of tuples containing the path and title.
+#epub_post_files = []
+
+# A list of files that should not be packed into the epub file.
+epub_exclude_files = ['search.html']
+
+# The depth of the table of contents in toc.ncx.
+#epub_tocdepth = 3
+
+# Allow duplicate toc entries.
+#epub_tocdup = True
+
+# Choose between 'default' and 'includehidden'.
+#epub_tocscope = 'default'
+
+# Fix unsupported image types using the PIL.
+#epub_fix_images = False
+
+# Scale large images.
+#epub_max_image_width = 0
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#epub_show_urls = 'inline'
+
+# If false, no index is generated.
+#epub_use_index = True
@@ -0,0 +1,22 @@
+.. colab documentation master file, created by
+   sphinx-quickstart on Thu Jan 22 10:59:39 2015.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+Welcome to colab's documentation!
+=================================
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+
@@ -0,0 +1,177 @@		@@ -0,0 +1,177 @@
	1	+# Makefile for Sphinx documentation
	2	+#
	3	+
	4	+# You can set these variables from the command line.
	5	+SPHINXOPTS =
	6	+SPHINXBUILD = sphinx-build
	7	+PAPER =
	8	+BUILDDIR = build
	9	+
	10	+# User-friendly check for sphinx-build
	11	+ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
	12	+$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
	13	+endif
	14	+
	15	+# Internal variables.
	16	+PAPEROPT_a4 = -D latex_paper_size=a4
	17	+PAPEROPT_letter = -D latex_paper_size=letter
	18	+ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
	19	+# the i18n builder cannot share the environment and doctrees with the others
	20	+I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
	21	+
	22	+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
	23	+
	24	+help:
	25	+ @echo "Please use \`make <target>' where <target> is one of"
	26	+ @echo " html to make standalone HTML files"
	27	+ @echo " dirhtml to make HTML files named index.html in directories"
	28	+ @echo " singlehtml to make a single large HTML file"
	29	+ @echo " pickle to make pickle files"
	30	+ @echo " json to make JSON files"
	31	+ @echo " htmlhelp to make HTML files and a HTML help project"
	32	+ @echo " qthelp to make HTML files and a qthelp project"
	33	+ @echo " devhelp to make HTML files and a Devhelp project"
	34	+ @echo " epub to make an epub"
	35	+ @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
	36	+ @echo " latexpdf to make LaTeX files and run them through pdflatex"
	37	+ @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
	38	+ @echo " text to make text files"
	39	+ @echo " man to make manual pages"
	40	+ @echo " texinfo to make Texinfo files"
	41	+ @echo " info to make Texinfo files and run them through makeinfo"
	42	+ @echo " gettext to make PO message catalogs"
	43	+ @echo " changes to make an overview of all changed/added/deprecated items"
	44	+ @echo " xml to make Docutils-native XML files"
	45	+ @echo " pseudoxml to make pseudoxml-XML files for display purposes"
	46	+ @echo " linkcheck to check all external links for integrity"
	47	+ @echo " doctest to run all doctests embedded in the documentation (if enabled)"
	48	+
	49	+clean:
	50	+ rm -rf $(BUILDDIR)/*
	51	+
	52	+html:
	53	+ $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
	54	+ @echo
	55	+ @echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
	56	+
	57	+dirhtml:
	58	+ $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
	59	+ @echo
	60	+ @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
	61	+
	62	+singlehtml:
	63	+ $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
	64	+ @echo
	65	+ @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
	66	+
	67	+pickle:
	68	+ $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
	69	+ @echo
	70	+ @echo "Build finished; now you can process the pickle files."
	71	+
	72	+json:
	73	+ $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
	74	+ @echo
	75	+ @echo "Build finished; now you can process the JSON files."
	76	+
	77	+htmlhelp:
	78	+ $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
	79	+ @echo
	80	+ @echo "Build finished; now you can run HTML Help Workshop with the" \
	81	+ ".hhp project file in $(BUILDDIR)/htmlhelp."
	82	+
	83	+qthelp:
	84	+ $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
	85	+ @echo
	86	+ @echo "Build finished; now you can run "qcollectiongenerator" with the" \
	87	+ ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
	88	+ @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/colab.qhcp"
	89	+ @echo "To view the help file:"
	90	+ @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/colab.qhc"
	91	+
	92	+devhelp:
	93	+ $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
	94	+ @echo
	95	+ @echo "Build finished."
	96	+ @echo "To view the help file:"
	97	+ @echo "# mkdir -p $$HOME/.local/share/devhelp/colab"
	98	+ @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/colab"
	99	+ @echo "# devhelp"
	100	+
	101	+epub:
	102	+ $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
	103	+ @echo
	104	+ @echo "Build finished. The epub file is in $(BUILDDIR)/epub."
	105	+
	106	+latex:
	107	+ $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
	108	+ @echo
	109	+ @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
	110	+ @echo "Run \`make' in that directory to run these through (pdf)latex" \
	111	+ "(use \`make latexpdf' here to do that automatically)."
	112	+
	113	+latexpdf:
	114	+ $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
	115	+ @echo "Running LaTeX files through pdflatex..."
	116	+ $(MAKE) -C $(BUILDDIR)/latex all-pdf
	117	+ @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
	118	+
	119	+latexpdfja:
	120	+ $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
	121	+ @echo "Running LaTeX files through platex and dvipdfmx..."
	122	+ $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
	123	+ @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
	124	+
	125	+text:
	126	+ $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
	127	+ @echo
	128	+ @echo "Build finished. The text files are in $(BUILDDIR)/text."
	129	+
	130	+man:
	131	+ $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
	132	+ @echo
	133	+ @echo "Build finished. The manual pages are in $(BUILDDIR)/man."
	134	+
	135	+texinfo:
	136	+ $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
	137	+ @echo
	138	+ @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
	139	+ @echo "Run \`make' in that directory to run these through makeinfo" \
	140	+ "(use \`make info' here to do that automatically)."
	141	+
	142	+info:
	143	+ $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
	144	+ @echo "Running Texinfo files through makeinfo..."
	145	+ make -C $(BUILDDIR)/texinfo info
	146	+ @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
	147	+
	148	+gettext:
	149	+ $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
	150	+ @echo
	151	+ @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
	152	+
	153	+changes:
	154	+ $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
	155	+ @echo
	156	+ @echo "The overview file is in $(BUILDDIR)/changes."
	157	+
	158	+linkcheck:
	159	+ $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
	160	+ @echo
	161	+ @echo "Link check complete; look for any errors in the above output " \
	162	+ "or in $(BUILDDIR)/linkcheck/output.txt."
	163	+
	164	+doctest:
	165	+ $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
	166	+ @echo "Testing of doctests in the sources finished, look at the " \
	167	+ "results in $(BUILDDIR)/doctest/output.txt."
	168	+
	169	+xml:
	170	+ $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
	171	+ @echo
	172	+ @echo "Build finished. The XML files are in $(BUILDDIR)/xml."
	173	+
	174	+pseudoxml:
	175	+ $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
	176	+ @echo
	177	+ @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
@@ -0,0 +1,335 @@		@@ -0,0 +1,335 @@
	1	+# -- coding: utf-8 --
	2	+#
	3	+# colab documentation build configuration file, created by
	4	+# sphinx-quickstart on Thu Jan 22 10:59:39 2015.
	5	+#
	6	+# This file is execfile()d with the current directory set to its
	7	+# containing dir.
	8	+#
	9	+# Note that not all possible configuration values are present in this
	10	+# autogenerated file.
	11	+#
	12	+# All configuration values have a default; values that are commented out
	13	+# serve to show the default.
	14	+
	15	+import sys
	16	+import os
	17	+
	18	+# If extensions (or modules to document with autodoc) are in another directory,
	19	+# add these directories to sys.path here. If the directory is relative to the
	20	+# documentation root, use os.path.abspath to make it absolute, like shown here.
	21	+#sys.path.insert(0, os.path.abspath('.'))
	22	+
	23	+# -- General configuration ------------------------------------------------
	24	+
	25	+# If your documentation needs a minimal Sphinx version, state it here.
	26	+#needs_sphinx = '1.0'
	27	+
	28	+# Add any Sphinx extension module names here, as strings. They can be
	29	+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
	30	+# ones.
	31	+extensions = [
	32	+ 'sphinx.ext.autodoc',
	33	+ 'sphinx.ext.doctest',
	34	+ 'sphinx.ext.todo',
	35	+ 'sphinx.ext.coverage',
	36	+ 'sphinx.ext.pngmath',
	37	+ 'sphinx.ext.viewcode',
	38	+]
	39	+
	40	+# Add any paths that contain templates here, relative to this directory.
	41	+templates_path = ['_templates']
	42	+
	43	+# The suffix of source filenames.
	44	+source_suffix = '.rst'
	45	+
	46	+# The encoding of source files.
	47	+#source_encoding = 'utf-8-sig'
	48	+
	49	+# The master toctree document.
	50	+master_doc = 'index'
	51	+
	52	+# General information about the project.
	53	+project = u'colab'
	54	+copyright = u'2015, Sergio Oliveira'
	55	+
	56	+# The version info for the project you're documenting, acts as replacement for
	57	+# \|version\| and \|release\|, also used in various other places throughout the
	58	+# built documents.
	59	+#
	60	+# The short X.Y version.
	61	+version = '2.0'
	62	+# The full version, including alpha/beta/rc tags.
	63	+release = '2.0dev'
	64	+
	65	+# The language for content autogenerated by Sphinx. Refer to documentation
	66	+# for a list of supported languages.
	67	+#language = None
	68	+
	69	+# There are two options for replacing \|today\|: either, you set today to some
	70	+# non-false value, then it is used:
	71	+#today = ''
	72	+# Else, today_fmt is used as the format for a strftime call.
	73	+#today_fmt = '%B %d, %Y'
	74	+
	75	+# List of patterns, relative to source directory, that match files and
	76	+# directories to ignore when looking for source files.
	77	+exclude_patterns = []
	78	+
	79	+# The reST default role (used for this markup: `text`) to use for all
	80	+# documents.
	81	+#default_role = None
	82	+
	83	+# If true, '()' will be appended to :func: etc. cross-reference text.
	84	+#add_function_parentheses = True
	85	+
	86	+# If true, the current module name will be prepended to all description
	87	+# unit titles (such as .. function::).
	88	+#add_module_names = True
	89	+
	90	+# If true, sectionauthor and moduleauthor directives will be shown in the
	91	+# output. They are ignored by default.
	92	+#show_authors = False
	93	+
	94	+# The name of the Pygments (syntax highlighting) style to use.
	95	+pygments_style = 'sphinx'
	96	+
	97	+# A list of ignored prefixes for module index sorting.
	98	+#modindex_common_prefix = []
	99	+
	100	+# If true, keep warnings as "system message" paragraphs in the built documents.
	101	+#keep_warnings = False
	102	+
	103	+
	104	+# -- Options for HTML output ----------------------------------------------
	105	+
	106	+# The theme to use for HTML and HTML Help pages. See the documentation for
	107	+# a list of builtin themes.
	108	+html_theme = 'default'
	109	+
	110	+# Theme options are theme-specific and customize the look and feel of a theme
	111	+# further. For a list of options available for each theme, see the
	112	+# documentation.
	113	+#html_theme_options = {}
	114	+
	115	+# Add any paths that contain custom themes here, relative to this directory.
	116	+#html_theme_path = []
	117	+
	118	+# The name for this set of Sphinx documents. If None, it defaults to
	119	+# "<project> v<release> documentation".
	120	+#html_title = None
	121	+
	122	+# A shorter title for the navigation bar. Default is the same as html_title.
	123	+#html_short_title = None
	124	+
	125	+# The name of an image file (relative to this directory) to place at the top
	126	+# of the sidebar.
	127	+#html_logo = None
	128	+
	129	+# The name of an image file (within the static path) to use as favicon of the
	130	+# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
	131	+# pixels large.
	132	+#html_favicon = None
	133	+
	134	+# Add any paths that contain custom static files (such as style sheets) here,
	135	+# relative to this directory. They are copied after the builtin static files,
	136	+# so a file named "default.css" will overwrite the builtin "default.css".
	137	+html_static_path = ['_static']
	138	+
	139	+# Add any extra paths that contain custom files (such as robots.txt or
	140	+# .htaccess) here, relative to this directory. These files are copied
	141	+# directly to the root of the documentation.
	142	+#html_extra_path = []
	143	+
	144	+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
	145	+# using the given strftime format.
	146	+#html_last_updated_fmt = '%b %d, %Y'
	147	+
	148	+# If true, SmartyPants will be used to convert quotes and dashes to
	149	+# typographically correct entities.
	150	+#html_use_smartypants = True
	151	+
	152	+# Custom sidebar templates, maps document names to template names.
	153	+#html_sidebars = {}
	154	+
	155	+# Additional templates that should be rendered to pages, maps page names to
	156	+# template names.
	157	+#html_additional_pages = {}
	158	+
	159	+# If false, no module index is generated.
	160	+#html_domain_indices = True
	161	+
	162	+# If false, no index is generated.
	163	+#html_use_index = True
	164	+
	165	+# If true, the index is split into individual pages for each letter.
	166	+#html_split_index = False
	167	+
	168	+# If true, links to the reST sources are added to the pages.
	169	+#html_show_sourcelink = True
	170	+
	171	+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
	172	+#html_show_sphinx = True
	173	+
	174	+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
	175	+#html_show_copyright = True
	176	+
	177	+# If true, an OpenSearch description file will be output, and all pages will
	178	+# contain a <link> tag referring to it. The value of this option must be the
	179	+# base URL from which the finished HTML is served.
	180	+#html_use_opensearch = ''
	181	+
	182	+# This is the file name suffix for HTML files (e.g. ".xhtml").
	183	+#html_file_suffix = None
	184	+
	185	+# Output file base name for HTML help builder.
	186	+htmlhelp_basename = 'colabdoc'
	187	+
	188	+
	189	+# -- Options for LaTeX output ---------------------------------------------
	190	+
	191	+latex_elements = {
	192	+# The paper size ('letterpaper' or 'a4paper').
	193	+#'papersize': 'letterpaper',
	194	+
	195	+# The font size ('10pt', '11pt' or '12pt').
	196	+#'pointsize': '10pt',
	197	+
	198	+# Additional stuff for the LaTeX preamble.
	199	+#'preamble': '',
	200	+}
	201	+
	202	+# Grouping the document tree into LaTeX files. List of tuples
	203	+# (source start file, target name, title,
	204	+# author, documentclass [howto, manual, or own class]).
	205	+latex_documents = [
	206	+ ('index', 'colab.tex', u'colab Documentation',
	207	+ u'Sergio Oliveira', 'manual'),
	208	+]
	209	+
	210	+# The name of an image file (relative to this directory) to place at the top of
	211	+# the title page.
	212	+#latex_logo = None
	213	+
	214	+# For "manual" documents, if this is true, then toplevel headings are parts,
	215	+# not chapters.
	216	+#latex_use_parts = False
	217	+
	218	+# If true, show page references after internal links.
	219	+#latex_show_pagerefs = False
	220	+
	221	+# If true, show URL addresses after external links.
	222	+#latex_show_urls = False
	223	+
	224	+# Documents to append as an appendix to all manuals.
	225	+#latex_appendices = []
	226	+
	227	+# If false, no module index is generated.
	228	+#latex_domain_indices = True
	229	+
	230	+
	231	+# -- Options for manual page output ---------------------------------------
	232	+
	233	+# One entry per manual page. List of tuples
	234	+# (source start file, name, description, authors, manual section).
	235	+man_pages = [
	236	+ ('index', 'colab', u'colab Documentation',
	237	+ [u'Sergio Oliveira'], 1)
	238	+]
	239	+
	240	+# If true, show URL addresses after external links.
	241	+#man_show_urls = False
	242	+
	243	+
	244	+# -- Options for Texinfo output -------------------------------------------
	245	+
	246	+# Grouping the document tree into Texinfo files. List of tuples
	247	+# (source start file, target name, title, author,
	248	+# dir menu entry, description, category)
	249	+texinfo_documents = [
	250	+ ('index', 'colab', u'colab Documentation',
	251	+ u'Sergio Oliveira', 'colab', 'One line description of project.',
	252	+ 'Miscellaneous'),
	253	+]
	254	+
	255	+# Documents to append as an appendix to all manuals.
	256	+#texinfo_appendices = []
	257	+
	258	+# If false, no module index is generated.
	259	+#texinfo_domain_indices = True
	260	+
	261	+# How to display URL addresses: 'footnote', 'no', or 'inline'.
	262	+#texinfo_show_urls = 'footnote'
	263	+
	264	+# If true, do not generate a @detailmenu in the "Top" node's menu.
	265	+#texinfo_no_detailmenu = False
	266	+
	267	+
	268	+# -- Options for Epub output ----------------------------------------------
	269	+
	270	+# Bibliographic Dublin Core info.
	271	+epub_title = u'colab'
	272	+epub_author = u'Sergio Oliveira'
	273	+epub_publisher = u'Sergio Oliveira'
	274	+epub_copyright = u'2015, Sergio Oliveira'
	275	+
	276	+# The basename for the epub file. It defaults to the project name.
	277	+#epub_basename = u'colab'
	278	+
	279	+# The HTML theme for the epub output. Since the default themes are not optimized
	280	+# for small screen space, using the same theme for HTML and epub output is
	281	+# usually not wise. This defaults to 'epub', a theme designed to save visual
	282	+# space.
	283	+#epub_theme = 'epub'
	284	+
	285	+# The language of the text. It defaults to the language option
	286	+# or en if the language is not set.
	287	+#epub_language = ''
	288	+
	289	+# The scheme of the identifier. Typical schemes are ISBN or URL.
	290	+#epub_scheme = ''
	291	+
	292	+# The unique identifier of the text. This can be a ISBN number
	293	+# or the project homepage.
	294	+#epub_identifier = ''
	295	+
	296	+# A unique identification for the text.
	297	+#epub_uid = ''
	298	+
	299	+# A tuple containing the cover image and cover page html template filenames.
	300	+#epub_cover = ()
	301	+
	302	+# A sequence of (type, uri, title) tuples for the guide element of content.opf.
	303	+#epub_guide = ()
	304	+
	305	+# HTML files that should be inserted before the pages created by sphinx.
	306	+# The format is a list of tuples containing the path and title.
	307	+#epub_pre_files = []
	308	+
	309	+# HTML files shat should be inserted after the pages created by sphinx.
	310	+# The format is a list of tuples containing the path and title.
	311	+#epub_post_files = []
	312	+
	313	+# A list of files that should not be packed into the epub file.
	314	+epub_exclude_files = ['search.html']
	315	+
	316	+# The depth of the table of contents in toc.ncx.
	317	+#epub_tocdepth = 3
	318	+
	319	+# Allow duplicate toc entries.
	320	+#epub_tocdup = True
	321	+
	322	+# Choose between 'default' and 'includehidden'.
	323	+#epub_tocscope = 'default'
	324	+
	325	+# Fix unsupported image types using the PIL.
	326	+#epub_fix_images = False
	327	+
	328	+# Scale large images.
	329	+#epub_max_image_width = 0
	330	+
	331	+# How to display URL addresses: 'footnote', 'no', or 'inline'.
	332	+#epub_show_urls = 'inline'
	333	+
	334	+# If false, no index is generated.
	335	+#epub_use_index = True
@@ -0,0 +1,22 @@		@@ -0,0 +1,22 @@
	1	+.. colab documentation master file, created by
	2	+ sphinx-quickstart on Thu Jan 22 10:59:39 2015.
	3	+ You can adapt this file completely to your liking, but it should at least
	4	+ contain the root `toctree` directive.
	5	+
	6	+Welcome to colab's documentation!
	7	+=================================
	8	+
	9	+Contents:
	10	+
	11	+.. toctree::
	12	+ :maxdepth: 2
	13	+
	14	+
	15	+
	16	+Indices and tables
	17	+==================
	18	+
	19	+* :ref:`genindex`
	20	+* :ref:`modindex`
	21	+* :ref:`search`
	22	+